← Back to Transfer Sticker FAQ & How-to Guide
How to Use ViVi Stationery® UV DTF Transfer Stickers
1 Prepare your surface
Make sure your paper, card stock, glass, or other surface is clean and dry.
2 Rub over the design using a soft scraper
Gently rub over the front (transparent sheet). We recommend using a soft, flexible scraper; avoid sharp or hard tools. For simple designs without fine details or letters, you can often skip this step once you’re familiar with the product.
3 Peel off the backing sheet
Slowly peel away the backing. If some parts still stick, lay the transparent sheet back down, press, and lift again. Bending the backing layer helps peel it off smoothly.
4 Apply to your surface
Position the transparent sheet on your paper, card stock, glass, or any smooth surface.
5 Press and smooth the design
For large, simple designs, pressing with your hand is often enough. For delicate details, use the included small wooden stick to ensure they stick perfectly.
6 Peel away the transparent sheet
Slowly peel off the transparent sheet, and admire your finished result!
Tips for Best Results
- ✨ Some materials (like certain types of resin) may react differently. We recommend testing a small area first.
- ✨ Not suitable for use on fabric or clothing.
- ✨For small or delicate designs (like fine letters), peel the transfer film back at a sharp angle, almost folding it flat against the surface, so the pulling force stays parallel to the paper instead of upward. This helps the design stay down instead of lifting.
- ✨If one angle still won’t release after thorough rubbing, try peeling from a different direction. Sometimes a change of angle makes the transfer easier.
Instruction Video
Watch the video below for a full demonstration: